KATON® FK3 belong to a brand new generation of very low temperature peroxide curable FKM. Theey have been designed to offer out-standing low temperature flexibility (i.e. TR10 = -40°C). Like all other KATON® peroxide curable grades, they exhibit excellent processability and superior mechanical properties and sealing ability; moreover they need very short post curing cycles.
KATON® offers medium (FK3) customer's requirements. Accordingly to the curing technology, KATON® FK3 molding techniques, including injection, injection-compression, compression and transfer molding.
KATON® FK3 can be used with all typical peroxide curing system and the other fluoroelastomer compounding ingredients. Mixing can be accomplished with two or internal mixers. This material can be extruded into hoses or profiles or can be calendered to mak or belting.
Some of the basic proprties of KATON® FK3 are:• Outstanding low temperature behavior
• Very good chemical resistance
• Low post cure
• Superior mold flow
• Lack of mold fouling
• Excellent mold release
• Very good chemical resistance
KATON FKM TYPE-3 O-RING | MTBE, Methanol, Alcohol-blended fuels Resistant
KATON® FK3 belong to a brand new generation of very low temperature peroxide curable FKM.
Fluorine content: ±3% (tested in non-filled material state)
70 Usage above 300°C for high-temperature applications
Usage below -40°C for ultra-low-temperature applications
✔ Resistant to weak acids, bases, and aromatic hydrocarbons
✔ Resistant to moderate acids, bases, weak ketones, and ether organic solvents
✔ Resistant to strong acids, ammonia, high pH, and corrosive environments
Resistant to high concentrations of ketones, ethers, esters, and phenol organic solvents
Resistant to aromatic hydrocarbons, toluene, and alcohol-based organic solvents
✔ Steam, hot water, and mineral acid resistance
Permeability to FUEL-C fuel
✔ Resistant to vehicle fuels and gasoline additives like ETOH and MTBE
✔ Resistant to engine lubricating oils (SG, SH grades)
✔ Compatible with hydraulic oils, mineral oils, synthetic oils, and transmission oils
✔ Compatible with brake fluids
✔ Suitable for refrigerant systems
High tensile strength, tear, and break resistance
✔ Resistant to compression set
✔ Low friction coefficient
Suitable for high-pressure industrial machinery applications
Suitable for AED (Anti-Explosive Decompression) applications in ultra-high pressure oil wells
Suitable for high-purity, zero-contaminant applications in semiconductors
Resistant to semiconductor plasma
✔ Resistant to high concentrations of O2 and O3 gases
Suitable for semiconductor plasma processes with high concentrations of O2 and O3 gases
Suitable for front-end semiconductor ETCH process applications
✔ Suitable for front-end semiconductor CVD process applications
Suitable for processes involving the emission of exhaust gases in front-end semiconductor production
✔ Food processing equipment with detectable metal-filled heat exchangers
Food processing equipment with FDA-compliant, high-purity, sterilization processes
✔